Prefabricated track-road slabs TINES® TRAM LC-L for tram tracks are produced in standard dimensions:
- Width: 2.40 m; 2.20 m; 2.00 m; 1.76m.
- Thickness: 0.35 m or 0.40 m.
- Length: 1 m (TINES® TRAM LC-L1); 1.5 m (TINES® TRAM LC-L1.5); 3m (TINES® TRAM LC-L3); 4m (TINES® TRAM LC-L4).
Depending on the placement of the slabs in the track and their functions, they can be produced in the following variants:
TINES® TRAM LC-LO – drainage track slabs, with a built-in drainage channel, remove rainwater from rail grooves and the track surface to sewer manholes.
TINES® TRAM LC-LO – drainage slab
TINES® TRAM LC-LK: cable track slabs with a cable channel built-in during fabrication, allowing the passage of technical cables under the rails for electrical and intertrack connections.
TINES® TRAM LC-LK – cable slab
TINES® TRAM LC-LW manhole track slabs, with a built-in pipe and manhole, provide access to a sewer manhole under the slab.
TINES® TRAM LC-LW – manhole slab
TINES® TRAM LC-LT – : trapezoidal track slabs for installation in curves with a radius ≤ 60 m, allowing the reduction of the gap that arises between slabs laid on a horizontal curve with a small radius on the outer side of the curve. Trapezoidal slabs are produced as slabs with a length of 1000 mm, with the length of the slab on one side increased by 40 mm or 80 mm, forming an isosceles trapezium shape from the top view. For curves with a radius of 60 m ≥ R≥ 30 m, trapezoidal slabs with a length of one side of 1040 mm are used. For curves with a radius of 30 m ≥ R≥ 20 m, trapezoidal slabs with a length of one side of 1080 mm are used.
TINES® TRAM LC-LT – trapezoidal slab
Prefabricated TINES® TRAM LC-L slabs for tram tracks are produced in standard widths of 1.76, 2.00, 2.20, and 2.40m, lengths of 4.0m, 3.0m, 1.5m, and 1.0m, and thicknesses of 0.35m or 0.40m.
The selection of slab dimensions depends on the geometric layout of the track, and it is possible to produce slabs of any length, adjusted to design requirements, depending on the envisaged type of rail profile, cross-section shape, or track width.
Documents:
- National Technical Assessment No. IK-KOT-2020/0091 Edition 4
- National Factory Production Control Certificate No. 128-UWB-081
- National Declarations of Performance
- Technical Cards
An integral part of tram tracks using prefabricated tram-road slabs TINES®TRAM LC-L is a set of TINES® Polyrailresins for creating a rail attachment system in the liner in the slab channels and for filling the gaps between the slabs.
For a technical and commercial offer, please contact handlowy@tinesrail.com
